Click image to view full size image
ECO Fold and Form Pipe liner are used for sewer and conduit rehabilitation. Sizes with corresponding minimum thickness requirement is listed in the following table.
Sizes （inches） |
Minimum Wall Thickness （inches） |
6 |
0.12 |
8 |
0.16 |
12 |
0.20 |
16 |
0.24 |
18 |
0.24 |
20 |
0.28 |
24 |
0.30 |
30 |
0.35 |
36 |
0.40 |
40 |
0.45 |
42 |
0.50 |
48 |
0.50 |
Material:
ECO Fold and Form material complies with ASTM D1784 "Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds".
Extruded Pipe:
Eco Pipeliner conforms to ASTM F1504 "Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation" with the following key material properties.
Flexural Modulus |
ASTM – D790>280,000 psi |
Flexural Strength |
ASTM – D790>7,000 psi |
Tensile Modulus |
ASTM – D638>140,000 psi |
Tensile Strength |
ASTM – D638>4,000 psi |
Marking:
Eco Pipeliner is marked as prescribed in the above applicable standards to indicate manufacturer's trademark, size of the pipe, material designation, and continuous length information.
Colour Coding:
Eco Pipeliner is colour-coded blue or white.
Warranty:
1 (one) year product warranty.
Note: Modifications to our products may occur at any time without notice. Should you require that a product meets a given standard or application, you must ensure that the information provided herein is current by consulting with an ANYUE representative.
http://www.ay-trenchless.com/